It can reduce the diameter by up to 3/4″ per pass. Note that some lathes may be constructed in such a way as to prevent mounting the Vega Duplicator on the rear of the machine. ![]() ![]() This option is to mount the duplicator on the front and hand turn from the back side of the lathe with the spindle reversed. The third option is available only to those with a reversing lathe. This gives you access to the front of the lathe for hand turning. The second option is to mount the duplicator on the back side of the lathe and turn the cutter upside down. The first option is to remove the duplicator by loosening 2 bolts. Then the last cuts are made, working from the high points of the turning down into the coves. Excess material is quickly removed by locking cutters in-out motion and turning the handwheel of the duplicator to move the cutter along the axis of the lathe bed. ![]() You either make a template (which has the profile of the turning cut into it) or mount an original turning that you wish to copy (4″ diameter maximum for original turnings). The duplicator works on the same principle as a key cutter. The duplicator will give you superb tool control, making turning safer, faster and more accurate. For all but the most experienced hand turners, the Vega Pro duplicator will give you much faster stock removal, good surface finish on most woods and the ability to produce duplicate spindles that are exactly the same.
0 Comments
Leave a Reply. |